How to Clean Grout Between Tiles (And Keep It Clean Longer)

Why grout gets dirty faster than the tiles themselves
Tiles are glazed and non-porous, so dirt mostly sits on the surface and wipes off easily. Grout is the opposite — it's a porous mix of cement and sand, which means soap residue, grease, and moisture soak straight into it. In a typical Vilnius apartment bathroom, that combination of steam from showers and poor ventilation is exactly what turns white grout grey within a year or two, and black or pink in damp corners where mold takes hold.
The good news is that grout can almost always be restored without replacing it, as long as it hasn't crumbled or cracked. It just takes the right tools and a bit of patience — scrubbing harder with the wrong product usually makes things worse, not better.
Step-by-step: cleaning grout properly
- Dry-brush first. Before any liquid touches the grout, sweep or vacuum the area. Wet dust turns into paste that's harder to remove.
- Choose your cleaner based on the problem:
- For everyday grime: a paste of baking soda and water (roughly 3:1) works well and is safe on colored grout.
- For mold or mildew: a solution of 1 part bleach to 4 parts water, or a store-bought mold spray, applied only to white or light grey grout.
- For mineral buildup and soap scum: white vinegar diluted 1:1 with water — but never use it on natural stone tiles, as the acid can etch the surface.
- Apply and wait. Spread the paste or spray directly onto the grout lines and let it sit for 10–15 minutes. This dwell time does most of the work — scrubbing a dry cleaner barely helps.
- Scrub with the right brush. An old toothbrush works for small bathrooms; a stiff nylon grout brush (sold cheaply at most hardware stores) is faster for kitchens or larger floors. Scrub along the line, not across it, to avoid pushing dirt into clean sections.
- Rinse thoroughly. Use a damp microfiber cloth or a bucket of clean water, going over the area twice. Leftover cleaner residue attracts dirt faster than before.
- Dry the area completely. Open a window or run the extractor fan for at least 20 minutes afterward — grout that stays damp is grout that molds again within weeks.
When regular cleaning isn't enough
If grout is stained dark grey or black even after scrubbing, or if water sits on the surface instead of beading off, it's worn past surface cleaning and needs sealing or re-grouting. A few signs to check:
- Grout crumbles or flakes when you scratch it lightly with a fingernail.
- Discoloration returns within days of cleaning, even with good ventilation.
- There are visible gaps or cracks where water can get behind the tile.
In those cases, a grout sealer (applied after a full clean and dry) adds a protective layer that repels water and oil for 6–12 months, which makes future cleaning dramatically easier.
Keeping grout clean for longer
- Squeegee shower walls and floors after each use — this alone cuts mold growth significantly.
- Wipe kitchen backsplash grout weekly with a damp cloth to catch grease before it sets.
- Run bathroom extractor fans for 15–20 minutes after showering, especially in winter when windows stay shut.
- Reapply sealer once a year on high-moisture areas like shower floors.
The bottom line
Grout cleaning isn't glamorous, but it's one of those small, regular jobs that keeps a whole bathroom or kitchen looking genuinely clean rather than just tidy on the surface. The method matters more than the elbow grease — the right product, a few minutes of dwell time, and proper drying will outperform aggressive scrubbing every time.
If grout lines across your apartment have built up over months and a weekend clean feels like too much to tackle alone, CleanWhale's cleaning teams in Vilnius handle exactly this kind of detail work as part of a full apartment clean. Book an apartment cleaning and let someone else deal with the grout brush.
CleanWhale —Your Trusted Home Helper




We work in 15 countries,
848 cities









